Creating jewelry is fascinating and complex, which may take weeks or months. The time-consuming process of making jewelry uses different technologies and processes, requiring the experience of many professionals.


At Jewelry OEM, our skilled jewelry manufacturer processes all our jewelry under one roof. This reduces our costs and enables us to provide high quality jewelry for consumers at unparalleled prices. Here you can see some facts about Jewelry OEM manufacturing process.


1.Jewelry making starts with an idea






"The main thing is not the fabric! The most important thing is this idea!" (Coco Chanel). Like fashion, jewelry is made from an idea. Jewelers’ designers begin their work by writing the imagination on paper. They first sketch out the ideas, which constituted a primary outline of the jewel. Then they process it later.





2.Jewelry prototype





The next stage is to make a jewelry prototype, which is grown from 3D printers and used to make jewelry silver samples. This is a time-consuming process because gypsum needs to be evenly dried.


Then the silver sample is filled with silver gypsum mound, which has many traces of the 3D printing process and must be cleaned manually. The final castings are processed by the jewelers’ designers to repair any defects and improve the whole jewelry model. This result is known as the Master Model. 




3.Jewelry Manufacturer-Metal Jewelry Casting





The main model is used to produce "rubber", which is the jewelry for making wax "copies" of the model. The heated wax is injected into the rubber mound under pressure,which can be done manually.


Then is the most magical stage of jewelry production, all wax models are welded to a rod of a rough wax model. Once filled, bubbles and bubbles remove the bell jar and negative atmosphere from the "deburring" flask from the mud. Then a burnt flask will have no remaining wax or resin, leaving a hollow impression that the trees and sculptures are burning from it.


The next stage is jewelry casting. When the flask is cooled, the form of investment is destroyed, and the remaining gypsum is cut off. At the same time, the so-called feeder has been removed.


4.Shaping, polishing and finishing



Starting with rough wheels and debris, jewelers begin to use tools with grains until deep scratches and unwanted shapes are removed. This includes the highlights of each piece: its central diamond.  At last, a piece of diamond jewelry is finished, 


Come and find more jewelry works of art at Jewelry OEM!



The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
You have successfully subscribed!
This email has been registered